Power Tools
Brand: AIRCRAFT
MPN: BRAD GEL F30
AirCraft Brad Nails — 18 Gauge × 30 mm (Box of 5 000)
Deliver a clean, subtle finish on interior woodwork. These 18-gauge, 30 mm brads drive flush with a tiny head that’s easy to fill, making them ideal for skirtings, architraves, beading, cabinet assembly and light mouldings. Supplied in a contractor-friendly 5 000-piece box and optimised for the AirCraft AT0001 (and most straight-magazine 18 g nailers).....
N$ 89.93
Ex VAT:N$ 78.20
Brand: AIRCRAFT
MPN: BRAD GEL F38
AirCraft Brad Nails — 18 Gauge × 38 mm (Box of 5 000)
Deliver a clean, subtle finish on interior woodwork. These 18-gauge, 38 mm brads drive flush with a tiny head that’s easy to fill, making them ideal for skirtings, architraves, beading, cabinet assembly and light mouldings. Supplied in a contractor-friendly 5 000-piece box and optimised for the AirCraft AT0001 (and most straight-magazine 18 g nailers).....
N$ 144.33
Ex VAT:N$ 125.50
Brand: AIRCRAFT
MPN: BRAD GEL F50
AirCraft Brad Nails — 18 Gauge × 50 mm (Box of 5 000)
Deliver a clean, subtle finish on interior woodwork. These 18-gauge, 50 mm brads drive flush with a tiny head that’s easy to fill, making them ideal for skirtings, architraves, beading, cabinet assembly and light mouldings. Supplied in a contractor-friendly 5 000-piece box and optimised for the AirCraft AT0001 (and most straight-magazine 18 g nailers).....
N$ 150.08
Ex VAT:N$ 130.50
Brand: AIRCRAFT
MPN: AT0022-01
AirCraft Buffing Wheel For Air Tyre Buffer (AT0022-01)
At a Glance: Replacement buffing/scuffing wheel for the AirCraft AT0022—designed for controlled tyre roughing and surface keying before repairs or recapping.
The wheel is where the tyre buffer earns its keep. A fresh buffing wheel cuts cleaner, scuffs more evenly, and gives you the consistent surface profile you need for strong bonding during repairs and recapping preparation. When the wheel is worn or glazed, you end up working harder..
N$ 561.20
Ex VAT:N$ 488.00
Brand: AIRCRAFT
MPN: AT0017-25
AirCraft Bushing for Air Die Grinder 6mm Mini (AT0017-25)
At a Glance: Replacement bushing for the AirCraft AT0017 6mm Mini Air Die Grinder—helps maintain correct fit, spacing, and stable internal alignment.
The AirCraft AT0017-25 Bushing is a small ring-style support component used in the AT0017 6mm Mini Air Die Grinder. Bushings are often used as spacers, guides, or wear surfaces inside the tool—helping keep shafts and rotating components correctly positioned and reducing unwanted ..
N$ 13.57
Ex VAT:N$ 11.80
Brand: AIRCRAFT
MPN: AT0012-26
AirCraft Bushing For AT0012 Reversible Air Drill (AT0012-26)
At a Glance: Replacement bushing that supports internal shafts and helps keep the AT0012 running smoother, quieter and more accurately.
Bushings don’t get the glory, but they absolutely control the feel of a tool. The AirCraft AT0012-26 Bushing is a replacement internal bushing for the AirCraft AT0012 reversible air drill. Its job is to support and guide rotating components, keeping shafts properly aligned while reducing metal-on-met..
N$ 97.52
Ex VAT:N$ 84.80
Brand: AIRCRAFT
MPN: AT0005-31
AirCraft Chuck 10mm (3/8") for Air Drill 10mm Reversible 1800rpm (AT0005-31)
At a Glance: 10mm (3/8") replacement drill chuck for AirCraft 10mm reversible air drill—restores solid bit grip and smooth drilling control.
A worn chuck turns a good air drill into a frustration machine—bits slip, wobble increases and accuracy goes out the window. The AirCraft AT0005-31 10mm (3/8") chuck is a replacement chuck for the AirCraft 10mm reversible 1800rpm air drill, designed to clamp securely and hold y..
N$ 216.20
Ex VAT:N$ 188.00
Brand: AIRCRAFT
MPN: AT0012-33
AirCraft Drill Chuck For AT0012 Reversible Air Drill (AT0012-33)
At a Glance: Replacement drill chuck that grips bits firmly and keeps your AT0012 drilling straight and dependable.
A drill is only as good as the part that holds the bit. The AirCraft AT0012-33 Drill Chuck is a replacement chuck for the AirCraft AT0012 reversible air drill, designed to restore strong, stable bit clamping when the original chuck is worn, slipping, damaged, or no longer tightening smoothly. A fresh chuck improves ..
N$ 281.18
Ex VAT:N$ 244.50
Brand: AIRCRAFT
MPN: AT0015-23
AirCraft Clamp Nut for Air Ratchet Wrench 3/8" (AT0015-23) for Model AT0015
At a Glance: Genuine clamp nut for the AirCraft AT0015 3/8" air ratchet wrench—threaded locking nut used to clamp and secure the assembly for stable, consistent performance.
The AirCraft AT0015-23 clamp nut is a critical threaded locking nut used on the AT0015 3/8" air ratchet wrench to clamp components together and keep the front-end/drive assembly properly secured. When a clamp nut is worn, damaged, or its threads ar..
N$ 82.57
Ex VAT:N$ 71.80
Brand: AIRCRAFT
MPN: AT0017-29
AirCraft Collet Base for Air Die Grinder 6mm Mini (AT0017-29)
At a Glance: Replacement collet base (collet holder) for the AirCraft AT0017 6mm Mini Air Die Grinder—helps keep burrs and attachments clamped securely and aligned.
The AirCraft AT0017-29 Collet Base is the foundation of the tool’s clamping system on the AT0017 6mm Mini Air Die Grinder. It supports and locates the collet assembly so your 6mm shank accessories—burrs, rotary files, stones and other attachments—seat properly ..
N$ 82.57
Ex VAT:N$ 71.80
Brand: AIRCRAFT
MPN: AT0017-30
AirCraft Collet for Air Die Grinder 6mm Mini (AT0017-30)
At a Glance: Replacement 6mm collet for the AirCraft AT0017 Mini Air Die Grinder—clamps 6mm shank accessories securely and keeps them running true.
The AirCraft AT0017-30 Collet is the business end of your AT0017 6mm Mini Air Die Grinder—the part that actually grips the accessory shank. When the collet is worn, cracked, or distorted, you’ll feel it immediately: accessories slip, run-out increases, vibration goes up, and precisi..
N$ 57.27
Ex VAT:N$ 49.80
Brand: AIRCRAFT
MPN: AT0019-SK07
AirCraft Compl. Magazine Kit (26,35,36,39,41-47) For AT0019 (AT0019-SK07)
At a Glance: Complete magazine and feeding hardware kit (Parts 26, 35, 36, 39, 41–47) that restores smooth staple loading, consistent feeding and fewer jams on the AirCraft AT0019.
A pneumatic stapler can have all the power in the world—but if the magazine is worn or out of alignment, it turns into a jam machine. The magazine assembly controls staple alignment, spring tension, and feeding consistency, and it takes pl..
N$ 51.98
Ex VAT:N$ 45.20